Biomechanical comparison of fixation methods in transverse patella fractures pdf
Transverse patellar fractures are common and a variety of fixation techniques exist, however a lack of comparative biomechanical data remains. In our study, the Group II cannulated lag
Background: Operative fixation of displaced patella fractures has now become the standard of care. This study aims to asses functional outcomes, as well as identify complications in a patients treated with non-absorbable braided suture fixation for patellar fractures.
For non-displaced and dislocated non-comminuted transverse patellar fractures (2-part) modified anterior tension band wiring is the treatment of choice and can be combined – due to its biomechanical superiority – with cannulated screw fixation. In severe comminuted fractures, open reduction and fixation with small fragment screws or new angular stable plates for anatomic restoration of the
Metacarpal (MC) fractures are very common, accounting for 18% of all fractures distal to the elbow. Many MC fractures can be treated non-operatively; however, some are treated most effectively with surgical stabilization, for which there are multiple methods.
Thelen S, Schneppendahl J, Jopen E, et al. Biomechanical cadaver testing of a fixed-angle plate in comparison to tension wiring and screw fixation in transverse patella fractures. Injury. 2012; 43 …
Nondisplaced, closed patellar fractures, including stellate, transverse, and vertical, or fractures with less than 2-mm articular steps can be treated conservatively. 3 x 3 Galla, M. and Lobenhoffer, P. Patella fractures.
Tension band wiring for patellar fractures is common, but some recent reports refer to disadvantages of this approach. Our anatomical and biomechanical study focused on use of tension band techniques in patellar fractures. The anatomy of the patella and tendon insertion was examined with knee
Methods: We used a wooden model of a patella with a midway transverse fracture and compared four different types of fixation. The first construct had a vertical figure-of-8 with one twist of wire.
YouTube Embed: No video/playlist ID has been supplied
Biomechanical comparison of a new staple technique with
The Use of Dual Reconstruction Plates for Failed Fixation
fixation of pathological fractures. The purpose of this study is to The purpose of this study is to compare the biomechanical parameters of five reported techniques of
Objective This study compared the mechanical properties of the normal intact suspensory apparatus and two methods of fixation for repair of transverse, midbody fractures of the proximal sesamoid bones of adult horses: transfixation wiring (TW) and screws placed in lag fashion (LS).
The aim of this biomechanical study is to examine how three different methods of fixation, for Vancouver type B1 PFF, alter the stiffness and strain of a construct under various configurations in order to gain a better insight into the optimal fixation method.
Biomechanical studies on transverse olecranon and patellar fractures: a systematic review with the development of a new scoring method . Author. Maarten Heusinkveld. Download with Google Download with Facebook or download with email. Biomechanical studies on transverse olecranon and patellar fractures: a systematic review with the development of a new scoring method. Download. Biomechanical
For non-displaced and dislocated non-comminuted transverse patellar fractures (2-part) modified anterior tension band wiring is the treatment of choice and can be combined – due to its biomechanical superiority – with cannulated screw fixation. In severe comminuted fractures, open reduction and fixation with small fragment screws or new angular stable plates for anatomic restoration of the
Background: Displaced transverse patellar fractures require open reduction and internal fixation. State-of-the-art stabilization techniques are tension band wiring …
In this biomechanical study, the strength of five different fixation techniques -anterior tension band wiring with K-wires, separate vertical wiring, headless compression screws with anterior tension band wiring, cannulated screws with tension band wiring and memory shape patellar fixator- for distal patellar fractures were compared.
Conclusion: Interference screw fixation to the medial patella was found to be significantly stronger than suture anchor fixation when comparing the ultimate failure load and stiffness. Clinical Relevance: This study compares the biomechanical properties of 2 commonly used methods for patellar graft fixation in
The used fixation method salvaged three patients in whom traditional TBW had failed to maintain an anatomical reduction. 8 Anterior TBW through cannulated screws is most appropriate for treating transverse patella fractures with two substantial bony fragments and that it may be advantageous in osteoporotic bone. 8
Abstract: Displaced patella fractures require operative treatment. Tension band wiring is the most common tech- Tension band wiring is the most common tech- nique for the fixation such fractures; however, the procedure is often complicated by wire migration.
Background. Screw fixation is a common method used for the treatment of Mason type II radial head fractures. The purpose of our study was to evaluate the mechanical properties of three different screw orientations used for fixation of Mason type II radial head fractures.
fracture was noted during tension of the cerclage wire and was successfully managed by screw fixation of the split fracture. Conclusions: Split fracture is a rare complication of circumferential cerclage wiring of patellar fracture.
Patellar Fractures in Adults Abstract Patellar fracture is a common injury caused by excessive tension through the extensor mechanism or a direct blow.
The cable pin system is an effective device for fixation of transverse patella fractures. However, whether this device provides superior results using a minimally invasive technique instead of conventional open surgery using the K wire tension band method is unclear. We asked whether a …
Methods. Twenty-one identical patellae made of polyurethane foam (Sawbones ®), osteotomized to create a transverse two-part fracture, were fixed with modified anterior tension wiring, cannulated lag screws with anterior tension wiring or bilateral polyaxial 2.7-mm fixed-angle plates.
Fixed-angle plates in patella fractures a pilot cadaver
Read “An In Vitro Biomechanical Comparison of Two Fixation Methods for Transverse Osteotomies of the Medial Proximal Forelimb Sesamoid Bones in Horses, Veterinary Surgery” on DeepDyve, the largest online rental service for scholarly research with thousands of academic publications available at …
Methods. Twelve human cadaveric knees with simulated transverse patella fractures were assigned to two groups for treatment with tension band wiring using either Kirschner (K-) wires or cannulated screws.
Methods. Depression fractures of the lateral tibial plateau were simulated in 14 porcine knees. Fracture fragments were elevated through a reamed transtibial tunnel and samples were randomly assigned to a fixation method. 7 knees underwent traditional fixation with parallel subcortical cannulated screws, the remainder were stabilized using a
Fixation of patella fractures with braided polyester suture: a biomechanical study. 6 Pages. Fixation of patella fractures with braided polyester suture: a biomechanical study. Authors. Brent Parks + 4. Brent Parks. Yao Wang. Dr. Vipul Patel. Frank Ebert. Riyaz Jinnah . Download with Google Download with Facebook or download with email. Fixation of patella fractures with braided polyester
The treatment techniques used are widely applicable in the clinical setting for the treatment of transverse fractures of the patella. No specialized equipment or training is required for the general or subspecialized orthopaedic surgeon.
1 3 DOI 10.1007/s00776-015-0735-3 J Orthop Sci ORIGINAL ARTICLE Periprosthetic femoral fracture fixation: a biomechanical comparison between proximal locking screws and cables
Biomechanical testing was performed to evaluate five techniques of internal fixation of transverse patella fractures. Using cadaveric lower extremities, transverse osteotomies of the patella were
Among all fracture types of the patella, transverse fracture of the body is the most common [1 – 4]. If displaced, it should be repaired surgically to restore the function of extensor mechanism and aid in fracture healing [5, 6].
A transverse osteotomy was created to simulate an OTA/AO type 34-C1 transverse patellar fracture. The specimen pairs were randomly assigned to be fixed with TBW using cannulated screws or with the new intraosseous nail. Each specimen was cyclically tested for 5,000 cycles by pulling on the quadriceps tendon and simulating active knee extension and passive knee flexion within the range … – engineering mechanics dynamics 7th edition solutions manual meriam kraige In transverse, noncomminuted patella fractures, fixation with two Kirschner wires and a 1.0-millimeter braided cable tension loop was superior to the monofilament wire tension loop. Most importantly, the braided cable afforded more predictable results during cyclic loading.
Biomechanics of Acute Total Hip Arthroplasty after Acetabular Fracture: Plate vs Cable Fixation Mina S. R. Aziz Master of Science Institute of Medical Science University of Toronto 2014 Abstract The incidence of complex acetabular fractures is increasing worldwide, especially in the elderly. Fixation methods currently used surgically have no biomechanical justification. Therefore, this study
Patella, transverse fracture, open reduction, cannulated screw, anterior tension band INTRODUCTION The patella plays an important role in knee joint motion. Patellar fractures are mostly seen in the age group of 20-50 years, comprising about 1% of all skeletal injuries 1, 2. To preserve the range of knee motion adequate management followed by aggressive post-operative rehabilitation is
Objective: To compare monofilament wire versus braided cable for stabilizing transverse patella fractures using the modified AO tension band technique. Design: A randomized blocked (paired) study comparing two fixation methods. Statistical analysis was performed using a nested repeated measures
“Biomechanical Comparison of Fixation Methods in Transverse Patella Fracture: A Cadaveric Study” Clinical Orthopaedic Society, Kansas MO, Oct 1997 (3rd Prize) Orthopaedic Research Society, New Orleans, LA, March 1998
We investigated the biomechanical behaviour of a new staple technique for treatment of transverse patella fractures in a cadaveric model. Methods Eight human cadaveric knees with femur and tibia including soft tissue were used.
A 67 years old female presented with closed transverse right patellar fracture after simple fall on her knee two months previously (Fig. 1A) and gave a history of patellar non- resurfacing TKR 9 years ago. Examination revealed tenderness, 2-cm fracture gap with 45-degree extension lag, and inability to actively extend the right knee. Open reduction and internal fixation with TBW and repair of
The use of tension band wire technique for patella fractures fixation is a well-established technique. However, the standard technique, which involves using two Kirschner wires through the patella, can cause problems with prominent hardware, and difficulty capturing the change to figure of eight wire.
A biomechanical study comparing two fixation methods in depression fractures of the lateral tibial plateau in porcine bone Caroline M Blakey1*, Michael Rennison2, Stephen P Guy3 and Paul M Sutton1 Abstract Background: A novel method of fixation has been described for the treatment of pure depression fractures of the lateral tibial plateau. Fracture fragments are elevated through a reamed
Purpose: Biomechanical comparison of straight DCP and helical plates for fixation of transversal and oblique tibial bone fractures were analyzed and compared to each other by axial compression, bending and torsion tests.
[14] Parker PJ, Tepper KB, Brumbak RJ, Novak VP, Belkoff SM : Biomechanical comparison of fixation of type-I fractures of the lateral tibial plateau. Is the antiglide screw effective. J Bone Joint Surg (Br), 1999, 81, 478-480.
Thomas Scilaris M.D. Park Avenue Trauma Associates
The gold standard for treating transverse olecranon fractures is tension band fixation. A problem with this technique is migration of the K-wires leading to premature hardware removal. The aim of this study is to compare stability provided by two new techniques designed to eliminate the problem with
The clinical study of three kinds of internal fixation methods in the treatment of the patellar transverse fracture[J]. Journal of Bengbu Medical College, 2017, 42(2): 220-222. Journal of Bengbu Medical College, 2017, 42(2): 220-222.
Methods: A patellar model with a transverse fracture and loads simulating patellar tendon forces applied on the patella were used in the present simulation. The surgical fixation consisted of two
The transverse 2-part fracture is the most common type, accounting for 34% of all fractures, followed by multifragmentary distal patella fractures. 2 Surgical treatment of patellar fractures is
Approximately 50–80% of patellar fractures are transverse fractures • The modified tension band wiring (TBW) technique is the most widely used and accepted treatment for displaced transverse patella fractures • the use of the TBW technique is associated with prominent hardware and post-operative discomfort • Failure of fixation.Patella • Fracture of the patella constitutes ∼1% of
Currently, the usual surgical intervention for treatment of transverse patella fractures is open reduction with a sufficient incision and internal fixation using a K wire with the modified tension band method …
Fixation of Metacarpal Shaft Fractures Biomechanical
Biomechanical Evaluation of Current Patella Fracture
Medial patellar fixation with interference screws or suture anchors has been suggested to avoid complications, such as patellar fractures, associated with transverse tunnels that pass completely through the patella. 8,21,23,28,35 Advocates for interference screw fixation describe the potentially increased strength of fixation. 21 Proponents of suture anchors have highlighted the decreased risk
who followed up 10 patients with transverse patella fractures repaired with the MATB technique. At a mean At a mean follow-up of 24 months, 7 of the 10 patients had good to excellent outcomes, and there were no implant failures.
10/10/2018 · Dargel J, Gick S, Mader K, Koebke J, Pennig D. Biomechanical comparison of tension band- and interfragmentary screw fixation with a new implant in transverse patella fractures. Injury . 2010 Feb. 41 (2):156-60.
COMPARISON OF TWO TECHNIQUES OF FIGURE OF EIGHT TENSION BAND WIRING ON BIOMECHANICAL STABILITY OF PATELLAR FRACTURE Despina Ciocanel M.D. 1, 2, Steve Haman M.D. 2, Richard Yeasting Ph.D. 2,
Background: Transverse patellar fractures require fixation that anatomically restores continuity of the knee extensor complex and resiliency to the loads of early postoperative knee mobilization.
Methods. We used a saw blade to create transverse metacarpal neck fractures in 16 artificial metacarpal bone specimens, which were then treated with four types of fixation as follows: (1) locking plate with five locking bicortical screws (LP group), (2) regular plate with five bicortical screws (RP group), (3) two K-wires (K group), and (4) two
Original Article Deadman tension band for patella fractures: a clinical study Ming Yang 1*, many other patellar fracture fixation methods have been tried [12-18]. Whichever method is chosen, biomechanical testing has revealed that the tension band should closely contact the bone; in particular, the soft-tissue interfer-ence should be reduced on the distal and proxi – mal end of the patella
Tension-Band Wiring of Transverse Fractures of Patella
Surgical Management of Patellar Fractures Orthopedic Clinics
Methods. In six fresh unfixed female cadavers without history of previous fractures around the knee (average age 88.8 years) a bilateral fixed-angle plate fixation of the patella was carried out after previous placement of a transverse central osteotomy.
Introduction: Several methods of transverse patellar and olecranon fixation have been described. This article compares biomechanical studies of various fixation methods using a newly developed scoring method. Source of data: The databases PubMed, Web of Science, Science Direct, Google Scholar and
Various materials and fixation techniques have been tested to provide an improved fixation of transverse olecranon and patellar fractures. Areas of controversy The difference in biomechanical testing setup between the studies makes it hard to compare different fixation techniques.
• Compared 3 methods of transverse patella fixation in 18 cadaveric specimens – Modified anterior tension band wiring – Two lag screws – Cannulated screws and tension band • Cannulated lag screw with tension band wiring stronger than routine anterior tension band • Less articular surface displacement with lag screws Carpenter JE, et al. Biomechanical evaluation of current patella
Biomechanical comparison of straight DCP and helical
Objectives: The purpose of this study is to compare open reduction and internal fixation of the patella with a locking plate and tension-band construct (PF) versus cannulated screws and tension-band fixation …
This biomechanical study is the first to compare 3 fixation methods—bilateral fixed- angle plate, modified anterior tension wiring, and cannulated lag screws with anterior tension wiring—in multifragmentary distal patella fractures.
Biomechanical comparison of pin and tension-band wire fixation with a prototype locking plate fixation in a transverse canine patellar fracture model Gibert S, Kowaleski MP, Matthys R, Nützi R, Serck B, Boudrieau RJ.
Wang Y et al (2000) Fixation of patella fractures with braided polyester suture: a biomechanical study. Hou C. Ecker ML (1981) Transverse fractures of the patella. Chen A. J Orthop Trauma 11(5):351–356 3. Carpenter JE. 3rd edn. Georg Thieme.
First, the bone tunnels create stress risers in the patella that may lead to fractures of the patella, as have been reported by several authors. 10 x 10 Christiansen, S.E., Jacobsen, B.W., Lund, B., and Lind, M. Reconstruction of the medial patellofemoral ligament with gracilis tendon autograft in transverse patellar drill holes.
Evaluation of methods of internal fixation of transverse patella fractures: a biomechanical study. J Orthop Trauma . 1994; 8(2):147-153. LaLonde JA, Rabalais RD, Mansour A, et al.
Methods. Sixty-three patients with transverse patellar fractures displaced less than 8 mm were included in this prospective, randomized, controlled trial, with 52 patients in the final data analysis.
Conclusions: In transverse, noncomminuted patella fractures, fixation with two Kirschner wires and a 1.0-millimeter braided cable tension loop was superior to the monofilament wire tension loop. Most importantly, the braided cable afforded more predictable results during cyclic loading.
MOJ Orthopedics & Rheumatology Treatment of Patella Fractures by Compressive External Fixation (CEF) Volume 2 Issue 6 – 2015 Bari MM1,2*, Shahidul Islam 2, NH Shetu ,
Get PDF (905 KB) Abstract The popular configuration is parallel Kirschner wires (K-wires) and a stainless steel wire loop placed in a vertically oriented figure-of-8.ud ud Methodsud We used a wooden model of a patella with a midway transverse fracture and compared four different types of fixation.
Read “Biomechanical comparison of tension band- and interfragmentary screw fixation with a new implant in transverse patella fractures, Injury” on DeepDyve, the largest online rental service for scholarly research with thousands of academic publications available at your fingertips.
Transverse fractures of the olecranon a biomechanical
Biomechanical Evaluation of a Novel Suture Augment in
engineering mechanics hibbeler 13th edition pdf – Biomechanical analysis of tension band wiring (TBW) of
Split Fracture A Complication of Cerclage Wiring of Acute
Evaluation of Methods of Internal Fixation of Transverse
YouTube Embed: No video/playlist ID has been supplied
Biomechanical comparison of tension band- and DeepDyve
New fixation approach for transverse metacarpal neck
Treatment of Patella Fractures by Compressive External
• Compared 3 methods of transverse patella fixation in 18 cadaveric specimens – Modified anterior tension band wiring – Two lag screws – Cannulated screws and tension band • Cannulated lag screw with tension band wiring stronger than routine anterior tension band • Less articular surface displacement with lag screws Carpenter JE, et al. Biomechanical evaluation of current patella
fixation of pathological fractures. The purpose of this study is to The purpose of this study is to compare the biomechanical parameters of five reported techniques of
Biomechanical testing was performed to evaluate five techniques of internal fixation of transverse patella fractures. Using cadaveric lower extremities, transverse osteotomies of the patella were
10/10/2018 · Dargel J, Gick S, Mader K, Koebke J, Pennig D. Biomechanical comparison of tension band- and interfragmentary screw fixation with a new implant in transverse patella fractures. Injury . 2010 Feb. 41 (2):156-60.
Abstract: Displaced patella fractures require operative treatment. Tension band wiring is the most common tech- Tension band wiring is the most common tech- nique for the fixation such fractures; however, the procedure is often complicated by wire migration.
Background: Transverse patellar fractures require fixation that anatomically restores continuity of the knee extensor complex and resiliency to the loads of early postoperative knee mobilization.
A biomechanical study comparing two fixation methods in depression fractures of the lateral tibial plateau in porcine bone Caroline M Blakey1*, Michael Rennison2, Stephen P Guy3 and Paul M Sutton1 Abstract Background: A novel method of fixation has been described for the treatment of pure depression fractures of the lateral tibial plateau. Fracture fragments are elevated through a reamed
We investigated the biomechanical behaviour of a new staple technique for treatment of transverse patella fractures in a cadaveric model. Methods Eight human cadaveric knees with femur and tibia including soft tissue were used.
Various materials and fixation techniques have been tested to provide an improved fixation of transverse olecranon and patellar fractures. Areas of controversy The difference in biomechanical testing setup between the studies makes it hard to compare different fixation techniques.
who followed up 10 patients with transverse patella fractures repaired with the MATB technique. At a mean At a mean follow-up of 24 months, 7 of the 10 patients had good to excellent outcomes, and there were no implant failures.
Modified tension band technique for patella fractures EM
Internal Fixation of Transverse Patella Fractures Using
Methods. Sixty-three patients with transverse patellar fractures displaced less than 8 mm were included in this prospective, randomized, controlled trial, with 52 patients in the final data analysis.
The aim of this biomechanical study is to examine how three different methods of fixation, for Vancouver type B1 PFF, alter the stiffness and strain of a construct under various configurations in order to gain a better insight into the optimal fixation method.
This biomechanical study is the first to compare 3 fixation methods—bilateral fixed- angle plate, modified anterior tension wiring, and cannulated lag screws with anterior tension wiring—in multifragmentary distal patella fractures.
Nondisplaced, closed patellar fractures, including stellate, transverse, and vertical, or fractures with less than 2-mm articular steps can be treated conservatively. 3 x 3 Galla, M. and Lobenhoffer, P. Patella fractures.
Methods. Twenty-one identical patellae made of polyurethane foam (Sawbones ®), osteotomized to create a transverse two-part fracture, were fixed with modified anterior tension wiring, cannulated lag screws with anterior tension wiring or bilateral polyaxial 2.7-mm fixed-angle plates.
The clinical study of three kinds of internal fixation methods in the treatment of the patellar transverse fracture[J]. Journal of Bengbu Medical College, 2017, 42(2): 220-222. Journal of Bengbu Medical College, 2017, 42(2): 220-222.
Various materials and fixation techniques have been tested to provide an improved fixation of transverse olecranon and patellar fractures. Areas of controversy The difference in biomechanical testing setup between the studies makes it hard to compare different fixation techniques.
Background: Transverse patellar fractures require fixation that anatomically restores continuity of the knee extensor complex and resiliency to the loads of early postoperative knee mobilization.
Biomechanics of Acute Total Hip Arthroplasty after Acetabular Fracture: Plate vs Cable Fixation Mina S. R. Aziz Master of Science Institute of Medical Science University of Toronto 2014 Abstract The incidence of complex acetabular fractures is increasing worldwide, especially in the elderly. Fixation methods currently used surgically have no biomechanical justification. Therefore, this study
Purpose: Biomechanical comparison of straight DCP and helical plates for fixation of transversal and oblique tibial bone fractures were analyzed and compared to each other by axial compression, bending and torsion tests.
Medial Patellofemoral Ligament Reconstruction Using All
Effect of different orientations of screw fixation for
Thelen S, Schneppendahl J, Jopen E, et al. Biomechanical cadaver testing of a fixed-angle plate in comparison to tension wiring and screw fixation in transverse patella fractures. Injury. 2012; 43 …
Tension band wiring for patellar fractures is common, but some recent reports refer to disadvantages of this approach. Our anatomical and biomechanical study focused on use of tension band techniques in patellar fractures. The anatomy of the patella and tendon insertion was examined with knee
Methods. Depression fractures of the lateral tibial plateau were simulated in 14 porcine knees. Fracture fragments were elevated through a reamed transtibial tunnel and samples were randomly assigned to a fixation method. 7 knees underwent traditional fixation with parallel subcortical cannulated screws, the remainder were stabilized using a
This biomechanical study is the first to compare 3 fixation methods—bilateral fixed- angle plate, modified anterior tension wiring, and cannulated lag screws with anterior tension wiring—in multifragmentary distal patella fractures.
Methods. We used a saw blade to create transverse metacarpal neck fractures in 16 artificial metacarpal bone specimens, which were then treated with four types of fixation as follows: (1) locking plate with five locking bicortical screws (LP group), (2) regular plate with five bicortical screws (RP group), (3) two K-wires (K group), and (4) two
A 67 years old female presented with closed transverse right patellar fracture after simple fall on her knee two months previously (Fig. 1A) and gave a history of patellar non- resurfacing TKR 9 years ago. Examination revealed tenderness, 2-cm fracture gap with 45-degree extension lag, and inability to actively extend the right knee. Open reduction and internal fixation with TBW and repair of
Abstract: Displaced patella fractures require operative treatment. Tension band wiring is the most common tech- Tension band wiring is the most common tech- nique for the fixation such fractures; however, the procedure is often complicated by wire migration.
The treatment techniques used are widely applicable in the clinical setting for the treatment of transverse fractures of the patella. No specialized equipment or training is required for the general or subspecialized orthopaedic surgeon.
The use of tension band wire technique for patella fractures fixation is a well-established technique. However, the standard technique, which involves using two Kirschner wires through the patella, can cause problems with prominent hardware, and difficulty capturing the change to figure of eight wire.
Purpose: Biomechanical comparison of straight DCP and helical plates for fixation of transversal and oblique tibial bone fractures were analyzed and compared to each other by axial compression, bending and torsion tests.
Background: Transverse patellar fractures require fixation that anatomically restores continuity of the knee extensor complex and resiliency to the loads of early postoperative knee mobilization.
fixation of pathological fractures. The purpose of this study is to The purpose of this study is to compare the biomechanical parameters of five reported techniques of
Evaluation of methods of internal fixation of transverse patella fractures: a biomechanical study. J Orthop Trauma . 1994; 8(2):147-153. LaLonde JA, Rabalais RD, Mansour A, et al.
MOJ Orthopedics & Rheumatology Treatment of Patella Fractures by Compressive External Fixation (CEF) Volume 2 Issue 6 – 2015 Bari MM1,2*, Shahidul Islam 2, NH Shetu ,
A biomechanical study comparing two fixation methods in
Biomechanical Comparison of Conventional versus Cable Pin
Comparison of the outcomes of pull through suturing vs
Transverse patellar fractures are common and a variety of fixation techniques exist, however a lack of comparative biomechanical data remains. In our study, the Group II cannulated lag
Treatment of displaced transverse fractures of the patella
Review Article Patellar Fractures in Adults
Biomechanical comparison of tension band- and DeepDyve
Methods: A patellar model with a transverse fracture and loads simulating patellar tendon forces applied on the patella were used in the present simulation. The surgical fixation consisted of two
New fixation approach for transverse metacarpal neck
GMS GMS Interdisciplinary Plastic and Reconstructive
Surgical Management of Patellar Fractures Orthopedic Clinics
Objective This study compared the mechanical properties of the normal intact suspensory apparatus and two methods of fixation for repair of transverse, midbody fractures of the proximal sesamoid bones of adult horses: transfixation wiring (TW) and screws placed in lag fashion (LS).
Medial Patellofemoral Ligament Reconstruction Using All
Treatment of displaced transverse fractures of the patella
This biomechanical study is the first to compare 3 fixation methods—bilateral fixed- angle plate, modified anterior tension wiring, and cannulated lag screws with anterior tension wiring—in multifragmentary distal patella fractures.
Comparison of the outcomes of pull through suturing vs
Anatomical and biomechanical PubMed Central (PMC)
Modified tension band technique for patella fractures EM
Biomechanical comparison of pin and tension-band wire fixation with a prototype locking plate fixation in a transverse canine patellar fracture model Gibert S, Kowaleski MP, Matthys R, Nützi R, Serck B, Boudrieau RJ.
Comparison of the Cable Pin System With Europe PMC
Biomechanical comparison of pin and tension-band wire
Fixation of Multifragmentary Patella Fractures Using a
Original Article Deadman tension band for patella fractures: a clinical study Ming Yang 1*, many other patellar fracture fixation methods have been tried [12-18]. Whichever method is chosen, biomechanical testing has revealed that the tension band should closely contact the bone; in particular, the soft-tissue interfer-ence should be reduced on the distal and proxi – mal end of the patella
Patella Fracture Fixation with Suture and Wire you Reap
A 67 years old female presented with closed transverse right patellar fracture after simple fall on her knee two months previously (Fig. 1A) and gave a history of patellar non- resurfacing TKR 9 years ago. Examination revealed tenderness, 2-cm fracture gap with 45-degree extension lag, and inability to actively extend the right knee. Open reduction and internal fixation with TBW and repair of
Biomechanical Comparison of Conventional versus Cable Pin
This biomechanical study is the first to compare 3 fixation methods—bilateral fixed- angle plate, modified anterior tension wiring, and cannulated lag screws with anterior tension wiring—in multifragmentary distal patella fractures.
Patella Fractures Treatment & Management Approach
Biomechanical comparison of tension band- and DeepDyve
Original Article Novel method of Kirschner wire bending
Methods. Sixty-three patients with transverse patellar fractures displaced less than 8 mm were included in this prospective, randomized, controlled trial, with 52 patients in the final data analysis.
Treatment of Patella Fractures by Compressive External
A biomechanical comparison of conventional versus cable
Fixed-angle plates in patella fractures a pilot cadaver
First, the bone tunnels create stress risers in the patella that may lead to fractures of the patella, as have been reported by several authors. 10 x 10 Christiansen, S.E., Jacobsen, B.W., Lund, B., and Lind, M. Reconstruction of the medial patellofemoral ligament with gracilis tendon autograft in transverse patellar drill holes.
COMPARISON OF TWO TECHNIQUES OF FIGURE OF EIGHT
Comparison of the Cable Pin System With SpringerLink
Internal Fixation of Transverse Patella Fractures Using
Get PDF (905 KB) Abstract The popular configuration is parallel Kirschner wires (K-wires) and a stainless steel wire loop placed in a vertically oriented figure-of-8.ud ud Methodsud We used a wooden model of a patella with a midway transverse fracture and compared four different types of fixation.
Patella Fractures Treatment & Management Approach
Methods: We used a wooden model of a patella with a midway transverse fracture and compared four different types of fixation. The first construct had a vertical figure-of-8 with one twist of wire.
Anatomical and biomechanical evaluation of the tension
Periprosthetic femoral fracture fixation a biomechanical
Thomas Scilaris M.D. Park Avenue Trauma Associates
Introduction: Several methods of transverse patellar and olecranon fixation have been described. This article compares biomechanical studies of various fixation methods using a newly developed scoring method. Source of data: The databases PubMed, Web of Science, Science Direct, Google Scholar and
COMPARISON OF TWO TECHNIQUES OF FIGURE OF EIGHT
Biomechanical comparison of a new staple technique with
Internal Fixation of Transverse Patella Fractures Using
Evaluation of methods of internal fixation of transverse patella fractures: a biomechanical study. J Orthop Trauma . 1994; 8(2):147-153. LaLonde JA, Rabalais RD, Mansour A, et al.
Treatment of Patella Fractures by Compressive External
Biomechanics of Acute Total Hip Arthroplasty after Acetabular Fracture: Plate vs Cable Fixation Mina S. R. Aziz Master of Science Institute of Medical Science University of Toronto 2014 Abstract The incidence of complex acetabular fractures is increasing worldwide, especially in the elderly. Fixation methods currently used surgically have no biomechanical justification. Therefore, this study
Split Fracture A Complication of Cerclage Wiring of Acute
Effect of different orientations of screw fixation for
Comparison of the outcomes of cannulated screws vs
“Biomechanical Comparison of Fixation Methods in Transverse Patella Fracture: A Cadaveric Study” Clinical Orthopaedic Society, Kansas MO, Oct 1997 (3rd Prize) Orthopaedic Research Society, New Orleans, LA, March 1998
Comparison of the Cable Pin System With SpringerLink
A Locked Intraosseous Nail for Transverse Patellar
Fixation of patella fractures with braided polyester suture: a biomechanical study. 6 Pages. Fixation of patella fractures with braided polyester suture: a biomechanical study. Authors. Brent Parks + 4. Brent Parks. Yao Wang. Dr. Vipul Patel. Frank Ebert. Riyaz Jinnah . Download with Google Download with Facebook or download with email. Fixation of patella fractures with braided polyester
A BIOMECHANICAL COMPARISON OF TECHNIQUES OF FIXATION
Modified tension band technique for patella fractures EM
Anatomical and biomechanical evaluation of the tension
Background: Operative fixation of displaced patella fractures has now become the standard of care. This study aims to asses functional outcomes, as well as identify complications in a patients treated with non-absorbable braided suture fixation for patellar fractures.
Patella Fracture Fixation with Suture and Wire you Reap
The Use of Dual Reconstruction Plates for Failed Fixation
Patella Fractures Treatment & Management Approach
“Biomechanical Comparison of Fixation Methods in Transverse Patella Fracture: A Cadaveric Study” Clinical Orthopaedic Society, Kansas MO, Oct 1997 (3rd Prize) Orthopaedic Research Society, New Orleans, LA, March 1998
Biomechanical Comparison of Fixation Methods in Transverse
Evaluation of Methods of Internal Fixation of Transverse
The Use of Dual Reconstruction Plates for Failed Fixation
Objective This study compared the mechanical properties of the normal intact suspensory apparatus and two methods of fixation for repair of transverse, midbody fractures of the proximal sesamoid bones of adult horses: transfixation wiring (TW) and screws placed in lag fashion (LS).
Split Fracture A Complication of Cerclage Wiring of Acute
A BIOMECHANICAL COMPARISON OF TECHNIQUES OF FIXATION
GMS GMS Interdisciplinary Plastic and Reconstructive
fracture was noted during tension of the cerclage wire and was successfully managed by screw fixation of the split fracture. Conclusions: Split fracture is a rare complication of circumferential cerclage wiring of patellar fracture.
An Alternative Patellar Fracture Fixation A Biomechanical
GMS GMS Interdisciplinary Plastic and Reconstructive
Thomas Scilaris M.D. Park Avenue Trauma Associates
Methods. We used a saw blade to create transverse metacarpal neck fractures in 16 artificial metacarpal bone specimens, which were then treated with four types of fixation as follows: (1) locking plate with five locking bicortical screws (LP group), (2) regular plate with five bicortical screws (RP group), (3) two K-wires (K group), and (4) two
Evaluation of Methods of Internal Fixation of Transverse
Biomechanical comparison of pin and tension-band wire fixation with a prototype locking plate fixation in a transverse canine patellar fracture model Gibert S, Kowaleski MP, Matthys R, Nützi R, Serck B, Boudrieau RJ.
Split Fracture A Complication of Cerclage Wiring of Acute
Biomechanical studies on transverse olecranon and patellar
COMPARISON OF TWO TECHNIQUES OF FIGURE OF EIGHT TENSION BAND WIRING ON BIOMECHANICAL STABILITY OF PATELLAR FRACTURE Despina Ciocanel M.D. 1, 2, Steve Haman M.D. 2, Richard Yeasting Ph.D. 2,
Modified tension band technique for patella fractures EM
Comparison of the outcomes of cannulated screws vs
Get PDF (905 KB) Abstract The popular configuration is parallel Kirschner wires (K-wires) and a stainless steel wire loop placed in a vertically oriented figure-of-8.ud ud Methodsud We used a wooden model of a patella with a midway transverse fracture and compared four different types of fixation.
Current concepts review Fractures of the patella
Effect of different orientations of screw fixation for
In transverse, noncomminuted patella fractures, fixation with two Kirschner wires and a 1.0-millimeter braided cable tension loop was superior to the monofilament wire tension loop. Most importantly, the braided cable afforded more predictable results during cyclic loading.
An In Vitro Biomechanical Comparison of Two Fixation
Biomechanical evaluation of the tension band wiring
Biomechanical comparison of a new staple technique with
Biomechanical testing was performed to evaluate five techniques of internal fixation of transverse patella fractures. Using cadaveric lower extremities, transverse osteotomies of the patella were
New fixation approach for transverse metacarpal neck
Treatment of Patella Fractures by Compressive External
The clinical study of three kinds of internal fixation
Methods. We used a saw blade to create transverse metacarpal neck fractures in 16 artificial metacarpal bone specimens, which were then treated with four types of fixation as follows: (1) locking plate with five locking bicortical screws (LP group), (2) regular plate with five bicortical screws (RP group), (3) two K-wires (K group), and (4) two
Biomechanical comparison of straight DCP and helical
Effect of different orientations of screw fixation for
The clinical study of three kinds of internal fixation methods in the treatment of the patellar transverse fracture[J]. Journal of Bengbu Medical College, 2017, 42(2): 220-222. Journal of Bengbu Medical College, 2017, 42(2): 220-222.
A Locked Intraosseous Nail for Transverse Patellar
Biomechanical analysis of tension band wiring (TBW) of
A transverse osteotomy was created to simulate an OTA/AO type 34-C1 transverse patellar fracture. The specimen pairs were randomly assigned to be fixed with TBW using cannulated screws or with the new intraosseous nail. Each specimen was cyclically tested for 5,000 cycles by pulling on the quadriceps tendon and simulating active knee extension and passive knee flexion within the range …
Biomechanical Comparison of Conventional versus Cable Pin
In this biomechanical study, the strength of five different fixation techniques -anterior tension band wiring with K-wires, separate vertical wiring, headless compression screws with anterior tension band wiring, cannulated screws with tension band wiring and memory shape patellar fixator- for distal patellar fractures were compared.
Evaluation of Methods of Internal Fixation of Transverse
COMPARISON OF TWO TECHNIQUES OF FIGURE OF EIGHT TENSION BAND WIRING ON BIOMECHANICAL STABILITY OF PATELLAR FRACTURE Despina Ciocanel M.D. 1, 2, Steve Haman M.D. 2, Richard Yeasting Ph.D. 2,
Effect of different orientations of screw fixation for
A biomechanical study comparing two fixation methods in
Thomas Scilaris M.D. Park Avenue Trauma Associates
MOJ Orthopedics & Rheumatology Treatment of Patella Fractures by Compressive External Fixation (CEF) Volume 2 Issue 6 – 2015 Bari MM1,2*, Shahidul Islam 2, NH Shetu ,
Biomechanical comparison of tension band- and DeepDyve
Methods. Sixty-three patients with transverse patellar fractures displaced less than 8 mm were included in this prospective, randomized, controlled trial, with 52 patients in the final data analysis.
Biomechanical comparison of tension band- and DeepDyve
Periprosthetic femoral fracture fixation A biomechanical
Objective This study compared the mechanical properties of the normal intact suspensory apparatus and two methods of fixation for repair of transverse, midbody fractures of the proximal sesamoid bones of adult horses: transfixation wiring (TW) and screws placed in lag fashion (LS).
Tension-Band Wiring of Transverse Fractures of Patella
An In Vitro Biomechanical Comparison of Two Fixation
The use of tension band wire technique for patella fractures fixation is a well-established technique. However, the standard technique, which involves using two Kirschner wires through the patella, can cause problems with prominent hardware, and difficulty capturing the change to figure of eight wire.
Anatomical and biomechanical PubMed Central (PMC)
This biomechanical study is the first to compare 3 fixation methods—bilateral fixed- angle plate, modified anterior tension wiring, and cannulated lag screws with anterior tension wiring—in multifragmentary distal patella fractures.
Biomechanical comparison of tension band- and DeepDyve
A BIOMECHANICAL COMPARISON OF TECHNIQUES OF FIXATION
Among all fracture types of the patella, transverse fracture of the body is the most common [1 – 4]. If displaced, it should be repaired surgically to restore the function of extensor mechanism and aid in fracture healing [5, 6].
Periprosthetic femoral fracture fixation A biomechanical
Treatment of Patella Fractures by Compressive External
Tension-Band Wiring of Transverse Fractures of Patella
• Compared 3 methods of transverse patella fixation in 18 cadaveric specimens – Modified anterior tension band wiring – Two lag screws – Cannulated screws and tension band • Cannulated lag screw with tension band wiring stronger than routine anterior tension band • Less articular surface displacement with lag screws Carpenter JE, et al. Biomechanical evaluation of current patella
The Use of Dual Reconstruction Plates for Failed Fixation
Biomechanical comparison of tension band- and DeepDyve
Review Article Patellar Fractures in Adults
Nondisplaced, closed patellar fractures, including stellate, transverse, and vertical, or fractures with less than 2-mm articular steps can be treated conservatively. 3 x 3 Galla, M. and Lobenhoffer, P. Patella fractures.
Comparison of Two Tension-band Fixation Materials and
Biomechanical Comparison of Fixation Methods in Transverse
Patella Fractures Treatment & Management Approach
Fixation of patella fractures with braided polyester suture: a biomechanical study. 6 Pages. Fixation of patella fractures with braided polyester suture: a biomechanical study. Authors. Brent Parks + 4. Brent Parks. Yao Wang. Dr. Vipul Patel. Frank Ebert. Riyaz Jinnah . Download with Google Download with Facebook or download with email. Fixation of patella fractures with braided polyester
Fixation of patella fractures with braided polyester
Periprosthetic femoral fracture fixation A biomechanical
Fixation of Metacarpal Shaft Fractures Biomechanical
We investigated the biomechanical behaviour of a new staple technique for treatment of transverse patella fractures in a cadaveric model. Methods Eight human cadaveric knees with femur and tibia including soft tissue were used.
Original Article Novel method of Kirschner wire bending
Biomechanical comparison of pin and tension-band wire
The clinical study of three kinds of internal fixation methods in the treatment of the patellar transverse fracture[J]. Journal of Bengbu Medical College, 2017, 42(2): 220-222. Journal of Bengbu Medical College, 2017, 42(2): 220-222.
The Use of Dual Reconstruction Plates for Failed Fixation
Treatment of transverse patellar fractures a comparison
Patellar Fractures in Adults Abstract Patellar fracture is a common injury caused by excessive tension through the extensor mechanism or a direct blow.
An Alternative Patellar Fracture Fixation A Biomechanical
New fixation approach for transverse metacarpal neck
Read “An In Vitro Biomechanical Comparison of Two Fixation Methods for Transverse Osteotomies of the Medial Proximal Forelimb Sesamoid Bones in Horses, Veterinary Surgery” on DeepDyve, the largest online rental service for scholarly research with thousands of academic publications available at …
Fixation of Metacarpal Shaft Fractures Biomechanical
The clinical study of three kinds of internal fixation
Medial Patellofemoral Ligament Reconstruction Using All
Patellar Fractures in Adults Abstract Patellar fracture is a common injury caused by excessive tension through the extensor mechanism or a direct blow.
Is there any difference between the biomechanical
Medial Patellofemoral Ligament Reconstruction Using All
Conclusions: In transverse, noncomminuted patella fractures, fixation with two Kirschner wires and a 1.0-millimeter braided cable tension loop was superior to the monofilament wire tension loop. Most importantly, the braided cable afforded more predictable results during cyclic loading.
Patella Fractures Treatment & Management Approach
Fixation of patella fractures with braided polyester
Biomechanical comparison of a new staple technique with
Evaluation of methods of internal fixation of transverse patella fractures: a biomechanical study. J Orthop Trauma . 1994; 8(2):147-153. LaLonde JA, Rabalais RD, Mansour A, et al.
Biomechanical comparison of screw versus screw-plate
Split Fracture A Complication of Cerclage Wiring of Acute
Biomechanical comparison of a new staple technique with
The treatment techniques used are widely applicable in the clinical setting for the treatment of transverse fractures of the patella. No specialized equipment or training is required for the general or subspecialized orthopaedic surgeon.
Biomechanical studies on transverse olecranon and patellar
Biomechanical Evaluation of a Novel Suture Augment in
The clinical study of three kinds of internal fixation methods in the treatment of the patellar transverse fracture[J]. Journal of Bengbu Medical College, 2017, 42(2): 220-222. Journal of Bengbu Medical College, 2017, 42(2): 220-222.
Comparison of the Cable Pin System With Europe PMC
COMPARISON OF TWO TECHNIQUES OF FIGURE OF EIGHT
fracture was noted during tension of the cerclage wire and was successfully managed by screw fixation of the split fracture. Conclusions: Split fracture is a rare complication of circumferential cerclage wiring of patellar fracture.
Biomechanical Comparison of Conventional versus Cable Pin
Objectives: The purpose of this study is to compare open reduction and internal fixation of the patella with a locking plate and tension-band construct (PF) versus cannulated screws and tension-band fixation …
Biomechanical Studies on Transverse Olecranon and Patellar
DOI10.1007/s00167-012-1999-1 SpringerLink
Biomechanical comparison of a new staple technique with
Medial patellar fixation with interference screws or suture anchors has been suggested to avoid complications, such as patellar fractures, associated with transverse tunnels that pass completely through the patella. 8,21,23,28,35 Advocates for interference screw fixation describe the potentially increased strength of fixation. 21 Proponents of suture anchors have highlighted the decreased risk
Thomas Scilaris M.D. Park Avenue Trauma Associates
Treatment of displaced transverse fractures of the patella
New fixation approach for transverse metacarpal neck
Evaluation of methods of internal fixation of transverse patella fractures: a biomechanical study. J Orthop Trauma . 1994; 8(2):147-153. LaLonde JA, Rabalais RD, Mansour A, et al.
Biomechanical analysis of tension band wiring (TBW) of
Anatomical and biomechanical evaluation of the tension
New fixation approach for transverse metacarpal neck
Conclusion: Interference screw fixation to the medial patella was found to be significantly stronger than suture anchor fixation when comparing the ultimate failure load and stiffness. Clinical Relevance: This study compares the biomechanical properties of 2 commonly used methods for patellar graft fixation in
Biomechanical Studies on Transverse Olecranon and Patellar
Biomechanical comparison of screw versus screw-plate
Biomechanical Comparison of Patellar Fixation Techniques
COMPARISON OF TWO TECHNIQUES OF FIGURE OF EIGHT TENSION BAND WIRING ON BIOMECHANICAL STABILITY OF PATELLAR FRACTURE Despina Ciocanel M.D. 1, 2, Steve Haman M.D. 2, Richard Yeasting Ph.D. 2,
Biomechanics of Acute Total Hip Arthroplasty after
An Alternative Patellar Fracture Fixation A Biomechanical
Thomas Scilaris M.D. Park Avenue Trauma Associates
Background: Displaced transverse patellar fractures require open reduction and internal fixation. State-of-the-art stabilization techniques are tension band wiring …
Biomechanical Evaluation of a Novel Suture Augment in
Patella Fractures Treatment & Management Approach
In this biomechanical study, the strength of five different fixation techniques -anterior tension band wiring with K-wires, separate vertical wiring, headless compression screws with anterior tension band wiring, cannulated screws with tension band wiring and memory shape patellar fixator- for distal patellar fractures were compared.
Comparison of Two Tension-band Fixation Materials and
Comparison of the Cable Pin System With Europe PMC
DOI10.1007/s00167-012-1999-1 SpringerLink
In transverse, noncomminuted patella fractures, fixation with two Kirschner wires and a 1.0-millimeter braided cable tension loop was superior to the monofilament wire tension loop. Most importantly, the braided cable afforded more predictable results during cyclic loading.
Effect of different orientations of screw fixation for
Modified tension band technique for patella fractures EM
Anatomical and biomechanical evaluation of the tension
The treatment techniques used are widely applicable in the clinical setting for the treatment of transverse fractures of the patella. No specialized equipment or training is required for the general or subspecialized orthopaedic surgeon.
RESEARCH Open Access A biomechanical study comparing two
Internal Fixation of Transverse Patella Fractures Using
The gold standard for treating transverse olecranon fractures is tension band fixation. A problem with this technique is migration of the K-wires leading to premature hardware removal. The aim of this study is to compare stability provided by two new techniques designed to eliminate the problem with
A biomechanical comparison of conventional versus cable
Medial patellar fixation with interference screws or suture anchors has been suggested to avoid complications, such as patellar fractures, associated with transverse tunnels that pass completely through the patella. 8,21,23,28,35 Advocates for interference screw fixation describe the potentially increased strength of fixation. 21 Proponents of suture anchors have highlighted the decreased risk
Biomechanical Comparison of Fixation Methods in Transverse
Background. Screw fixation is a common method used for the treatment of Mason type II radial head fractures. The purpose of our study was to evaluate the mechanical properties of three different screw orientations used for fixation of Mason type II radial head fractures.
Biomechanical Comparison of Fixation Methods in Transverse
Evaluation of Methods of Internal Fixation of Transverse
COMPARISON OF TWO TECHNIQUES OF FIGURE OF EIGHT
Abstract: Displaced patella fractures require operative treatment. Tension band wiring is the most common tech- Tension band wiring is the most common tech- nique for the fixation such fractures; however, the procedure is often complicated by wire migration.
Treatment of transverse patellar fractures a comparison
Fixation of patella fractures with braided polyester
Medial Patellofemoral Ligament Reconstruction Using All
1 3 DOI 10.1007/s00776-015-0735-3 J Orthop Sci ORIGINAL ARTICLE Periprosthetic femoral fracture fixation: a biomechanical comparison between proximal locking screws and cables
Tension-Band Wiring of Transverse Fractures of Patella
The clinical study of three kinds of internal fixation
RESEARCH Open Access A biomechanical study comparing two
Background: Displaced transverse patellar fractures require open reduction and internal fixation. State-of-the-art stabilization techniques are tension band wiring …
Biomechanical comparison of a new staple technique with
Fixed-angle plates in patella fractures a pilot cadaver
The clinical study of three kinds of internal fixation methods in the treatment of the patellar transverse fracture[J]. Journal of Bengbu Medical College, 2017, 42(2): 220-222. Journal of Bengbu Medical College, 2017, 42(2): 220-222.
Patella Fractures Treatment & Management Approach
Original Article Deadman tension band for patella
RESEARCH Open Access A biomechanical study comparing two
Thelen S, Schneppendahl J, Jopen E, et al. Biomechanical cadaver testing of a fixed-angle plate in comparison to tension wiring and screw fixation in transverse patella fractures. Injury. 2012; 43 …
Fixation of Metacarpal Shaft Fractures Biomechanical
Fixed-angle plates in patella fractures a pilot cadaver
The Use of Dual Reconstruction Plates for Failed Fixation
Conclusions: In transverse, noncomminuted patella fractures, fixation with two Kirschner wires and a 1.0-millimeter braided cable tension loop was superior to the monofilament wire tension loop. Most importantly, the braided cable afforded more predictable results during cyclic loading.
Original Article Novel method of Kirschner wire bending
1 3 DOI 10.1007/s00776-015-0735-3 J Orthop Sci ORIGINAL ARTICLE Periprosthetic femoral fracture fixation: a biomechanical comparison between proximal locking screws and cables
The Use of Dual Reconstruction Plates for Failed Fixation
Medial Patellofemoral Ligament Reconstruction Using All
Original Article Novel method of Kirschner wire bending
The aim of this biomechanical study is to examine how three different methods of fixation, for Vancouver type B1 PFF, alter the stiffness and strain of a construct under various configurations in order to gain a better insight into the optimal fixation method.
DOI10.1007/s00167-012-1999-1 SpringerLink
Patella Fractures Treatment & Management Approach
Biomechanical Comparison of Fixation Methods in Transverse
Background. Screw fixation is a common method used for the treatment of Mason type II radial head fractures. The purpose of our study was to evaluate the mechanical properties of three different screw orientations used for fixation of Mason type II radial head fractures.
Evaluation of Methods of Internal Fixation of Transverse
Various materials and fixation techniques have been tested to provide an improved fixation of transverse olecranon and patellar fractures. Areas of controversy The difference in biomechanical testing setup between the studies makes it hard to compare different fixation techniques.
Fixation of Multifragmentary Patella Fractures Using a
Biomechanical evaluation of the tension band wiring
Methods: We used a wooden model of a patella with a midway transverse fracture and compared four different types of fixation. The first construct had a vertical figure-of-8 with one twist of wire.
Fixation of Multifragmentary Patella Fractures Using a
Comparison of the Cable Pin System With SpringerLink
The treatment techniques used are widely applicable in the clinical setting for the treatment of transverse fractures of the patella. No specialized equipment or training is required for the general or subspecialized orthopaedic surgeon.
Periprosthetic femoral fracture fixation a biomechanical
Biomechanics of Acute Total Hip Arthroplasty after
Biomechanical comparison of a new staple technique with
This biomechanical study is the first to compare 3 fixation methods—bilateral fixed- angle plate, modified anterior tension wiring, and cannulated lag screws with anterior tension wiring—in multifragmentary distal patella fractures.
Patella Fractures Treatment & Management Approach
A Locked Intraosseous Nail for Transverse Patellar
Biomechanics of Acute Total Hip Arthroplasty after
Introduction: Several methods of transverse patellar and olecranon fixation have been described. This article compares biomechanical studies of various fixation methods using a newly developed scoring method. Source of data: The databases PubMed, Web of Science, Science Direct, Google Scholar and
Surgical Management of Patellar Fractures Orthopedic Clinics
Patella, transverse fracture, open reduction, cannulated screw, anterior tension band INTRODUCTION The patella plays an important role in knee joint motion. Patellar fractures are mostly seen in the age group of 20-50 years, comprising about 1% of all skeletal injuries 1, 2. To preserve the range of knee motion adequate management followed by aggressive post-operative rehabilitation is
DOI10.1007/s00167-012-1999-1 SpringerLink
Patella, transverse fracture, open reduction, cannulated screw, anterior tension band INTRODUCTION The patella plays an important role in knee joint motion. Patellar fractures are mostly seen in the age group of 20-50 years, comprising about 1% of all skeletal injuries 1, 2. To preserve the range of knee motion adequate management followed by aggressive post-operative rehabilitation is
Comparison of the outcomes of pull through suturing vs
Original Article Deadman tension band for patella
Fixation of patella fractures with braided polyester suture: a biomechanical study. 6 Pages. Fixation of patella fractures with braided polyester suture: a biomechanical study. Authors. Brent Parks + 4. Brent Parks. Yao Wang. Dr. Vipul Patel. Frank Ebert. Riyaz Jinnah . Download with Google Download with Facebook or download with email. Fixation of patella fractures with braided polyester
Biomechanical studies on transverse olecranon and patellar
The Use of Dual Reconstruction Plates for Failed Fixation
Anatomical and biomechanical evaluation of the tension
First, the bone tunnels create stress risers in the patella that may lead to fractures of the patella, as have been reported by several authors. 10 x 10 Christiansen, S.E., Jacobsen, B.W., Lund, B., and Lind, M. Reconstruction of the medial patellofemoral ligament with gracilis tendon autograft in transverse patellar drill holes.
The clinical study of three kinds of internal fixation
Methods. Sixty-three patients with transverse patellar fractures displaced less than 8 mm were included in this prospective, randomized, controlled trial, with 52 patients in the final data analysis.
Comparison of the Cable Pin System With SpringerLink
“Biomechanical Comparison of Fixation Methods in Transverse Patella Fracture: A Cadaveric Study” Clinical Orthopaedic Society, Kansas MO, Oct 1997 (3rd Prize) Orthopaedic Research Society, New Orleans, LA, March 1998
Biomechanical evaluation of the tension band wiring
Is there any difference between the biomechanical
In transverse, noncomminuted patella fractures, fixation with two Kirschner wires and a 1.0-millimeter braided cable tension loop was superior to the monofilament wire tension loop. Most importantly, the braided cable afforded more predictable results during cyclic loading.
Periprosthetic femoral fracture fixation A biomechanical
The treatment techniques used are widely applicable in the clinical setting for the treatment of transverse fractures of the patella. No specialized equipment or training is required for the general or subspecialized orthopaedic surgeon.
Biomechanical comparison of tension band- and DeepDyve
Fixation of patella fractures with braided polyester suture: a biomechanical study. 6 Pages. Fixation of patella fractures with braided polyester suture: a biomechanical study. Authors. Brent Parks + 4. Brent Parks. Yao Wang. Dr. Vipul Patel. Frank Ebert. Riyaz Jinnah . Download with Google Download with Facebook or download with email. Fixation of patella fractures with braided polyester
Anatomical and biomechanical evaluation of the tension
A Locked Intraosseous Nail for Transverse Patellar
Fixed-angle plates in patella fractures a pilot cadaver
Approximately 50–80% of patellar fractures are transverse fractures • The modified tension band wiring (TBW) technique is the most widely used and accepted treatment for displaced transverse patella fractures • the use of the TBW technique is associated with prominent hardware and post-operative discomfort • Failure of fixation.Patella • Fracture of the patella constitutes ∼1% of
Surgical Management of Patellar Fractures Orthopedic Clinics
New fixation approach for transverse metacarpal neck
Modified tension band technique for patella fractures EM
The use of tension band wire technique for patella fractures fixation is a well-established technique. However, the standard technique, which involves using two Kirschner wires through the patella, can cause problems with prominent hardware, and difficulty capturing the change to figure of eight wire.
A biomechanical study comparing two fixation methods in
Evaluation of Methods of Internal Fixation of Transverse
Biomechanical comparison of screw versus screw-plate
Conclusions: In transverse, noncomminuted patella fractures, fixation with two Kirschner wires and a 1.0-millimeter braided cable tension loop was superior to the monofilament wire tension loop. Most importantly, the braided cable afforded more predictable results during cyclic loading.
Internal Fixation of Transverse Patella Fractures Using
fracture was noted during tension of the cerclage wire and was successfully managed by screw fixation of the split fracture. Conclusions: Split fracture is a rare complication of circumferential cerclage wiring of patellar fracture.
An Alternative Patellar Fracture Fixation A Biomechanical
Biomechanical analysis of tension band wiring (TBW) of
Read “An In Vitro Biomechanical Comparison of Two Fixation Methods for Transverse Osteotomies of the Medial Proximal Forelimb Sesamoid Bones in Horses, Veterinary Surgery” on DeepDyve, the largest online rental service for scholarly research with thousands of academic publications available at …
Patella Fractures Treatment & Management Approach
Modified tension band technique for patella fractures EM
1 3 DOI 10.1007/s00776-015-0735-3 J Orthop Sci ORIGINAL ARTICLE Periprosthetic femoral fracture fixation: a biomechanical comparison between proximal locking screws and cables
An In Vitro Biomechanical Comparison of Two Fixation
Methods. We used a saw blade to create transverse metacarpal neck fractures in 16 artificial metacarpal bone specimens, which were then treated with four types of fixation as follows: (1) locking plate with five locking bicortical screws (LP group), (2) regular plate with five bicortical screws (RP group), (3) two K-wires (K group), and (4) two
Fixation of Metacarpal Shaft Fractures Biomechanical
Biomechanical analysis of tension band wiring (TBW) of
Biomechanical Comparison of Conventional versus Cable Pin
Thelen S, Schneppendahl J, Jopen E, et al. Biomechanical cadaver testing of a fixed-angle plate in comparison to tension wiring and screw fixation in transverse patella fractures. Injury. 2012; 43 …
Biomechanical evaluation of the tension band wiring
The clinical study of three kinds of internal fixation
Biomechanical Evaluation of Current Patella Fracture
The used fixation method salvaged three patients in whom traditional TBW had failed to maintain an anatomical reduction. 8 Anterior TBW through cannulated screws is most appropriate for treating transverse patella fractures with two substantial bony fragments and that it may be advantageous in osteoporotic bone. 8
Review Article Patellar Fractures in Adults
Read “An In Vitro Biomechanical Comparison of Two Fixation Methods for Transverse Osteotomies of the Medial Proximal Forelimb Sesamoid Bones in Horses, Veterinary Surgery” on DeepDyve, the largest online rental service for scholarly research with thousands of academic publications available at …
The Use of Dual Reconstruction Plates for Failed Fixation
DOI10.1007/s00167-012-1999-1 SpringerLink
Biomechanical Studies on Transverse Olecranon and Patellar
Methods. In six fresh unfixed female cadavers without history of previous fractures around the knee (average age 88.8 years) a bilateral fixed-angle plate fixation of the patella was carried out after previous placement of a transverse central osteotomy.
RESEARCH Open Access A biomechanical study comparing two
MOJ Orthopedics & Rheumatology Treatment of Patella Fractures by Compressive External Fixation (CEF) Volume 2 Issue 6 – 2015 Bari MM1,2*, Shahidul Islam 2, NH Shetu ,
Periprosthetic femoral fracture fixation a biomechanical
Tension-Band Wiring of Transverse Fractures of Patella
Comparison of the Cable Pin System With SpringerLink
Currently, the usual surgical intervention for treatment of transverse patella fractures is open reduction with a sufficient incision and internal fixation using a K wire with the modified tension band method …
Anatomical and biomechanical PubMed Central (PMC)
Objectives: The purpose of this study is to compare open reduction and internal fixation of the patella with a locking plate and tension-band construct (PF) versus cannulated screws and tension-band fixation …
Treatment of Patella Fractures by Compressive External
Anatomical and biomechanical evaluation of the tension
Transverse fractures of the olecranon a biomechanical
A biomechanical study comparing two fixation methods in depression fractures of the lateral tibial plateau in porcine bone Caroline M Blakey1*, Michael Rennison2, Stephen P Guy3 and Paul M Sutton1 Abstract Background: A novel method of fixation has been described for the treatment of pure depression fractures of the lateral tibial plateau. Fracture fragments are elevated through a reamed
Split Fracture A Complication of Cerclage Wiring of Acute
Internal Fixation of Transverse Patella Fractures Using
Introduction: Several methods of transverse patellar and olecranon fixation have been described. This article compares biomechanical studies of various fixation methods using a newly developed scoring method. Source of data: The databases PubMed, Web of Science, Science Direct, Google Scholar and
Fixation of Metacarpal Shaft Fractures Biomechanical
Purpose: Biomechanical comparison of straight DCP and helical plates for fixation of transversal and oblique tibial bone fractures were analyzed and compared to each other by axial compression, bending and torsion tests.
The clinical study of three kinds of internal fixation
Currently, the usual surgical intervention for treatment of transverse patella fractures is open reduction with a sufficient incision and internal fixation using a K wire with the modified tension band method …
Biomechanical Studies on Transverse Olecranon and Patellar
Comparison of Two Tension-band Fixation Materials and
Background: Transverse patellar fractures require fixation that anatomically restores continuity of the knee extensor complex and resiliency to the loads of early postoperative knee mobilization.
Biomechanical Evaluation of a Novel Suture Augment in
Original Article Deadman tension band for patella fractures: a clinical study Ming Yang 1*, many other patellar fracture fixation methods have been tried [12-18]. Whichever method is chosen, biomechanical testing has revealed that the tension band should closely contact the bone; in particular, the soft-tissue interfer-ence should be reduced on the distal and proxi – mal end of the patella
Biomechanical comparison of pin and tension-band wire
The clinical study of three kinds of internal fixation
Methods. We used a saw blade to create transverse metacarpal neck fractures in 16 artificial metacarpal bone specimens, which were then treated with four types of fixation as follows: (1) locking plate with five locking bicortical screws (LP group), (2) regular plate with five bicortical screws (RP group), (3) two K-wires (K group), and (4) two
Transverse fractures of the olecranon a biomechanical
Biomechanical testing was performed to evaluate five techniques of internal fixation of transverse patella fractures. Using cadaveric lower extremities, transverse osteotomies of the patella were
Is there any difference between the biomechanical
Introduction: Several methods of transverse patellar and olecranon fixation have been described. This article compares biomechanical studies of various fixation methods using a newly developed scoring method. Source of data: The databases PubMed, Web of Science, Science Direct, Google Scholar and
Biomechanical Comparison of Fixation Methods in Transverse
Effect of different orientations of screw fixation for
Medial Patellofemoral Ligament Reconstruction Using All
The gold standard for treating transverse olecranon fractures is tension band fixation. A problem with this technique is migration of the K-wires leading to premature hardware removal. The aim of this study is to compare stability provided by two new techniques designed to eliminate the problem with
Treatment of Patella Fractures by Compressive External
Tension-Band Wiring of Transverse Fractures of Patella
Current concepts review Fractures of the patella
Medial patellar fixation with interference screws or suture anchors has been suggested to avoid complications, such as patellar fractures, associated with transverse tunnels that pass completely through the patella. 8,21,23,28,35 Advocates for interference screw fixation describe the potentially increased strength of fixation. 21 Proponents of suture anchors have highlighted the decreased risk
Is there any difference between the biomechanical
Background: Transverse patellar fractures require fixation that anatomically restores continuity of the knee extensor complex and resiliency to the loads of early postoperative knee mobilization.
Comparison of Two Tension-band Fixation Materials and
Biomechanical Evaluation of a Novel Suture Augment in
Biomechanical testing was performed to evaluate five techniques of internal fixation of transverse patella fractures. Using cadaveric lower extremities, transverse osteotomies of the patella were
Comparison of the Cable Pin System With SpringerLink
The aim of this biomechanical study is to examine how three different methods of fixation, for Vancouver type B1 PFF, alter the stiffness and strain of a construct under various configurations in order to gain a better insight into the optimal fixation method.
Review Article Patellar Fractures in Adults
Methods. Depression fractures of the lateral tibial plateau were simulated in 14 porcine knees. Fracture fragments were elevated through a reamed transtibial tunnel and samples were randomly assigned to a fixation method. 7 knees underwent traditional fixation with parallel subcortical cannulated screws, the remainder were stabilized using a
Patella Fractures Treatment & Management Approach
Anatomical and biomechanical evaluation of the tension
Methods. We used a saw blade to create transverse metacarpal neck fractures in 16 artificial metacarpal bone specimens, which were then treated with four types of fixation as follows: (1) locking plate with five locking bicortical screws (LP group), (2) regular plate with five bicortical screws (RP group), (3) two K-wires (K group), and (4) two
Fixation of patella fractures with braided polyester
A biomechanical comparison of conventional versus cable
Biomechanical analysis of tension band wiring (TBW) of
Currently, the usual surgical intervention for treatment of transverse patella fractures is open reduction with a sufficient incision and internal fixation using a K wire with the modified tension band method …
Fixation of Metacarpal Shaft Fractures Biomechanical
Treatment of transverse patellar fractures a comparison
Biomechanical Evaluation of Current Patella Fracture
The clinical study of three kinds of internal fixation methods in the treatment of the patellar transverse fracture[J]. Journal of Bengbu Medical College, 2017, 42(2): 220-222. Journal of Bengbu Medical College, 2017, 42(2): 220-222.
Biomechanics of Acute Total Hip Arthroplasty after
Evaluation of methods of internal fixation of transverse patella fractures: a biomechanical study. J Orthop Trauma . 1994; 8(2):147-153. LaLonde JA, Rabalais RD, Mansour A, et al.
Original Article Novel method of Kirschner wire bending
Biomechanical comparison of a new staple technique with
Background. Screw fixation is a common method used for the treatment of Mason type II radial head fractures. The purpose of our study was to evaluate the mechanical properties of three different screw orientations used for fixation of Mason type II radial head fractures.
Biomechanical Comparison of Conventional versus Cable Pin
The aim of this biomechanical study is to examine how three different methods of fixation, for Vancouver type B1 PFF, alter the stiffness and strain of a construct under various configurations in order to gain a better insight into the optimal fixation method.
Treatment of transverse patellar fractures a comparison
Treatment of displaced transverse fractures of the patella
Fixation of patella fractures with braided polyester
Patella, transverse fracture, open reduction, cannulated screw, anterior tension band INTRODUCTION The patella plays an important role in knee joint motion. Patellar fractures are mostly seen in the age group of 20-50 years, comprising about 1% of all skeletal injuries 1, 2. To preserve the range of knee motion adequate management followed by aggressive post-operative rehabilitation is
Thomas Scilaris M.D. Park Avenue Trauma Associates
Periprosthetic femoral fracture fixation a biomechanical
fracture was noted during tension of the cerclage wire and was successfully managed by screw fixation of the split fracture. Conclusions: Split fracture is a rare complication of circumferential cerclage wiring of patellar fracture.
A biomechanical study comparing two fixation methods in
A BIOMECHANICAL COMPARISON OF TECHNIQUES OF FIXATION
In this biomechanical study, the strength of five different fixation techniques -anterior tension band wiring with K-wires, separate vertical wiring, headless compression screws with anterior tension band wiring, cannulated screws with tension band wiring and memory shape patellar fixator- for distal patellar fractures were compared.
Original Article Deadman tension band for patella
A Locked Intraosseous Nail for Transverse Patellar
Biomechanical Comparison of Conventional versus Cable Pin
Conclusions: In transverse, noncomminuted patella fractures, fixation with two Kirschner wires and a 1.0-millimeter braided cable tension loop was superior to the monofilament wire tension loop. Most importantly, the braided cable afforded more predictable results during cyclic loading.
Biomechanical Evaluation of a Novel Suture Augment in
The Use of Dual Reconstruction Plates for Failed Fixation
Comparison of the Cable Pin System With Europe PMC
Methods. Depression fractures of the lateral tibial plateau were simulated in 14 porcine knees. Fracture fragments were elevated through a reamed transtibial tunnel and samples were randomly assigned to a fixation method. 7 knees underwent traditional fixation with parallel subcortical cannulated screws, the remainder were stabilized using a
Biomechanical comparison of a new staple technique with
Biomechanical comparison of screw versus screw-plate
Objectives: The purpose of this study is to compare open reduction and internal fixation of the patella with a locking plate and tension-band construct (PF) versus cannulated screws and tension-band fixation …
A biomechanical comparison of conventional versus cable
Biomechanical comparison of a new staple technique with
New fixation approach for transverse metacarpal neck
Metacarpal (MC) fractures are very common, accounting for 18% of all fractures distal to the elbow. Many MC fractures can be treated non-operatively; however, some are treated most effectively with surgical stabilization, for which there are multiple methods.
Biomechanical Evaluation of a Novel Suture Augment in
The used fixation method salvaged three patients in whom traditional TBW had failed to maintain an anatomical reduction. 8 Anterior TBW through cannulated screws is most appropriate for treating transverse patella fractures with two substantial bony fragments and that it may be advantageous in osteoporotic bone. 8
Biomechanical evaluation of the tension band wiring
Transverse fractures of the olecranon a biomechanical
Original Article Deadman tension band for patella
A 67 years old female presented with closed transverse right patellar fracture after simple fall on her knee two months previously (Fig. 1A) and gave a history of patellar non- resurfacing TKR 9 years ago. Examination revealed tenderness, 2-cm fracture gap with 45-degree extension lag, and inability to actively extend the right knee. Open reduction and internal fixation with TBW and repair of
Fixed-angle plates in patella fractures a pilot cadaver
Objective: To compare monofilament wire versus braided cable for stabilizing transverse patella fractures using the modified AO tension band technique. Design: A randomized blocked (paired) study comparing two fixation methods. Statistical analysis was performed using a nested repeated measures
RESEARCH Open Access A biomechanical study comparing two
In transverse, noncomminuted patella fractures, fixation with two Kirschner wires and a 1.0-millimeter braided cable tension loop was superior to the monofilament wire tension loop. Most importantly, the braided cable afforded more predictable results during cyclic loading.
Thomas Scilaris M.D. Park Avenue Trauma Associates
Currently, the usual surgical intervention for treatment of transverse patella fractures is open reduction with a sufficient incision and internal fixation using a K wire with the modified tension band method …
A BIOMECHANICAL COMPARISON OF TECHNIQUES OF FIXATION
Patellar Fractures in Adults Abstract Patellar fracture is a common injury caused by excessive tension through the extensor mechanism or a direct blow.
A biomechanical comparison of conventional versus cable
A Locked Intraosseous Nail for Transverse Patellar
The use of tension band wire technique for patella fractures fixation is a well-established technique. However, the standard technique, which involves using two Kirschner wires through the patella, can cause problems with prominent hardware, and difficulty capturing the change to figure of eight wire.
Patella Fracture Fixation with Suture and Wire you Reap
Internal Fixation of Transverse Patella Fractures Using
Biomechanical Comparison of Conventional versus Cable Pin
Biomechanical studies on transverse olecranon and patellar fractures: a systematic review with the development of a new scoring method . Author. Maarten Heusinkveld. Download with Google Download with Facebook or download with email. Biomechanical studies on transverse olecranon and patellar fractures: a systematic review with the development of a new scoring method. Download. Biomechanical
DOI10.1007/s00167-012-1999-1 SpringerLink
Fixation of Metacarpal Shaft Fractures Biomechanical
A BIOMECHANICAL COMPARISON OF TECHNIQUES OF FIXATION
Get PDF (905 KB) Abstract The popular configuration is parallel Kirschner wires (K-wires) and a stainless steel wire loop placed in a vertically oriented figure-of-8.ud ud Methodsud We used a wooden model of a patella with a midway transverse fracture and compared four different types of fixation.
Tension-Band Wiring of Transverse Fractures of Patella
An Alternative Patellar Fracture Fixation A Biomechanical
10/10/2018 · Dargel J, Gick S, Mader K, Koebke J, Pennig D. Biomechanical comparison of tension band- and interfragmentary screw fixation with a new implant in transverse patella fractures. Injury . 2010 Feb. 41 (2):156-60.
Comparison of Two Tension-band Fixation Materials and
For non-displaced and dislocated non-comminuted transverse patellar fractures (2-part) modified anterior tension band wiring is the treatment of choice and can be combined – due to its biomechanical superiority – with cannulated screw fixation. In severe comminuted fractures, open reduction and fixation with small fragment screws or new angular stable plates for anatomic restoration of the
Original Article Novel method of Kirschner wire bending
Anatomical and biomechanical evaluation of the tension
fracture was noted during tension of the cerclage wire and was successfully managed by screw fixation of the split fracture. Conclusions: Split fracture is a rare complication of circumferential cerclage wiring of patellar fracture.
The Use of Dual Reconstruction Plates for Failed Fixation
Methods. Twenty-one identical patellae made of polyurethane foam (Sawbones ®), osteotomized to create a transverse two-part fracture, were fixed with modified anterior tension wiring, cannulated lag screws with anterior tension wiring or bilateral polyaxial 2.7-mm fixed-angle plates.
Biomechanical comparison of screw versus screw-plate
Tension-Band Wiring of Transverse Fractures of Patella
Transverse patellar fractures are common and a variety of fixation techniques exist, however a lack of comparative biomechanical data remains. In our study, the Group II cannulated lag
Thomas Scilaris M.D. Park Avenue Trauma Associates
Current concepts review Fractures of the patella
The treatment techniques used are widely applicable in the clinical setting for the treatment of transverse fractures of the patella. No specialized equipment or training is required for the general or subspecialized orthopaedic surgeon.
Review Article Patellar Fractures in Adults
Biomechanical comparison of tension band- and DeepDyve
Treatment of transverse patellar fractures a comparison
The clinical study of three kinds of internal fixation methods in the treatment of the patellar transverse fracture[J]. Journal of Bengbu Medical College, 2017, 42(2): 220-222. Journal of Bengbu Medical College, 2017, 42(2): 220-222.
The clinical study of three kinds of internal fixation
Conclusion: Interference screw fixation to the medial patella was found to be significantly stronger than suture anchor fixation when comparing the ultimate failure load and stiffness. Clinical Relevance: This study compares the biomechanical properties of 2 commonly used methods for patellar graft fixation in
The clinical study of three kinds of internal fixation
Biomechanical Comparison of Conventional versus Cable Pin
Biomechanics of Acute Total Hip Arthroplasty after Acetabular Fracture: Plate vs Cable Fixation Mina S. R. Aziz Master of Science Institute of Medical Science University of Toronto 2014 Abstract The incidence of complex acetabular fractures is increasing worldwide, especially in the elderly. Fixation methods currently used surgically have no biomechanical justification. Therefore, this study
New fixation approach for transverse metacarpal neck
Methods. We used a saw blade to create transverse metacarpal neck fractures in 16 artificial metacarpal bone specimens, which were then treated with four types of fixation as follows: (1) locking plate with five locking bicortical screws (LP group), (2) regular plate with five bicortical screws (RP group), (3) two K-wires (K group), and (4) two
A Locked Intraosseous Nail for Transverse Patellar
Biomechanical evaluation of the tension band wiring
Biomechanical Comparison of Patellar Fixation Techniques
Background: Operative fixation of displaced patella fractures has now become the standard of care. This study aims to asses functional outcomes, as well as identify complications in a patients treated with non-absorbable braided suture fixation for patellar fractures.
Modified tension band technique for patella fractures EM
RESEARCH Open Access A biomechanical study comparing two
Biomechanical comparison of pin and tension-band wire
Various materials and fixation techniques have been tested to provide an improved fixation of transverse olecranon and patellar fractures. Areas of controversy The difference in biomechanical testing setup between the studies makes it hard to compare different fixation techniques.
Comparison of the Cable Pin System With Europe PMC
Comparison of the outcomes of cannulated screws vs
Biomechanical Studies on Transverse Olecranon and Patellar
Wang Y et al (2000) Fixation of patella fractures with braided polyester suture: a biomechanical study. Hou C. Ecker ML (1981) Transverse fractures of the patella. Chen A. J Orthop Trauma 11(5):351–356 3. Carpenter JE. 3rd edn. Georg Thieme.
Biomechanical Comparison of Patellar Fixation Techniques
Comparison of the Cable Pin System With Europe PMC
DOI10.1007/s00167-012-1999-1 SpringerLink
Background. Screw fixation is a common method used for the treatment of Mason type II radial head fractures. The purpose of our study was to evaluate the mechanical properties of three different screw orientations used for fixation of Mason type II radial head fractures.
Biomechanics of Acute Total Hip Arthroplasty after
Biomechanical Comparison of Fixation Methods in Transverse
Patella Fractures Treatment & Management Approach
COMPARISON OF TWO TECHNIQUES OF FIGURE OF EIGHT TENSION BAND WIRING ON BIOMECHANICAL STABILITY OF PATELLAR FRACTURE Despina Ciocanel M.D. 1, 2, Steve Haman M.D. 2, Richard Yeasting Ph.D. 2,
Biomechanical Studies on Transverse Olecranon and Patellar
Biomechanical comparison of tension band- and DeepDyve
Transverse patellar fractures are common and a variety of fixation techniques exist, however a lack of comparative biomechanical data remains. In our study, the Group II cannulated lag
Original Article Novel method of Kirschner wire bending
Background: Displaced transverse patellar fractures require open reduction and internal fixation. State-of-the-art stabilization techniques are tension band wiring …
A Locked Intraosseous Nail for Transverse Patellar
GMS GMS Interdisciplinary Plastic and Reconstructive
Abstract: Displaced patella fractures require operative treatment. Tension band wiring is the most common tech- Tension band wiring is the most common tech- nique for the fixation such fractures; however, the procedure is often complicated by wire migration.
GMS GMS Interdisciplinary Plastic and Reconstructive
The clinical study of three kinds of internal fixation
In transverse, noncomminuted patella fractures, fixation with two Kirschner wires and a 1.0-millimeter braided cable tension loop was superior to the monofilament wire tension loop. Most importantly, the braided cable afforded more predictable results during cyclic loading.
Review Article Patellar Fractures in Adults
Background: Displaced transverse patellar fractures require open reduction and internal fixation. State-of-the-art stabilization techniques are tension band wiring …
Biomechanical Studies on Transverse Olecranon and Patellar
Treatment of transverse patellar fractures a comparison
Original Article Novel method of Kirschner wire bending
Approximately 50–80% of patellar fractures are transverse fractures • The modified tension band wiring (TBW) technique is the most widely used and accepted treatment for displaced transverse patella fractures • the use of the TBW technique is associated with prominent hardware and post-operative discomfort • Failure of fixation.Patella • Fracture of the patella constitutes ∼1% of
Split Fracture A Complication of Cerclage Wiring of Acute
Objective This study compared the mechanical properties of the normal intact suspensory apparatus and two methods of fixation for repair of transverse, midbody fractures of the proximal sesamoid bones of adult horses: transfixation wiring (TW) and screws placed in lag fashion (LS).
Biomechanical comparison of a new staple technique with
Anatomical and biomechanical evaluation of the tension
First, the bone tunnels create stress risers in the patella that may lead to fractures of the patella, as have been reported by several authors. 10 x 10 Christiansen, S.E., Jacobsen, B.W., Lund, B., and Lind, M. Reconstruction of the medial patellofemoral ligament with gracilis tendon autograft in transverse patellar drill holes.
Biomechanical studies on transverse olecranon and patellar
A BIOMECHANICAL COMPARISON OF TECHNIQUES OF FIXATION
fracture was noted during tension of the cerclage wire and was successfully managed by screw fixation of the split fracture. Conclusions: Split fracture is a rare complication of circumferential cerclage wiring of patellar fracture.
A biomechanical comparison of conventional versus cable